Important message to all PSPs regarding Dial-Around compensation.

Payphone Service Providers (PSPs) are to be compensated for dial around calls made from their payphones.  The major Carriers have chosen Flex ANI as the preferred method for determining if a call is compensable.  In order for you to receive per call compensation, the Carriers should see either the “27”, “29”, or “70” Flex ANI codes on your payphone line.  The following procedures have been established for the PSP to test their payphone lines for Flex ANI.  The procedure may differ from Carrier to Carrier.  at&t has chosen to set up a toll free number that will block calls from payphones.  If your call is blocked, it means that the Carrier is seeing the Flex ANI code.

Flex ANI Codes: 

27 – Indicates a “dumb phone”.  The network provides the coin signaling.  Common on LEC payphones.

29 – Indicates a prison/inmate payphone.  These phones may have special restrictions on outgoing calls.

70 – Indicates a smart payphone.  Coin signaling is handled by the payphone. 

at&t Flex ANI Test Procedures

Dial the toll free number below to test for Flex ANI as seen by at&t’s network.

Dial   1-888-999-6563  for at&t’s Network

If at&t’s network sees Flex ANI on the line you will here a recording stating that this call cannot be completed from a payphone.  This is the recording you want to hear.  It means that at&t is seeing either the “27”, “29”, or “70” Flex ANI codes.

If at&t’s network does not see the proper Flex ANI codes you will here a recording stating “Your call has been completed.”  You do not want to hear this on a payphone line.  If you hear the message stating that your call has been completed, at&t directs you to call you local phone company and state that you are not getting Flex ANI on your payphone line as seen by at&t’s network.

Verizon/MCI/WorldCom Flex ANI Test Procedures

There are two toll free numbers that should be used to test Flex ANI for the legacy MCI and WorldCom networks.

Dial   1-866-729-5050           for Legacy MCI – 222

Dial   1-877-666-8883           for Legacy WorldCom - 555

If Flex ANI (“27”, “29”, or “70” ) is active from the individual payphone then the call will be blocked with a message stating that the call could not be competed from a payphone.  If Flex ANI is not active, then you will be advised to contact your LEC.

Sprint Flex ANI Test Procedures

The following is the toll free number that can be used to test FlexANI for the Sprint network.

    Sprint       800-375-6398

If FlexANI is active from the individual payphone then the call will be blocked with a message stating that the call
could not be competed from
the payphone.  If FlexANI is not active, then the call will be routed to a phone recording requesting the following information from the caller:
   
   
Name
    Call Back Number
    Payphone Number
   Local Exchange Company

The Global Crossing's test number is 1-866-261-0014 if Flex ANI is not being trasmitted you will be advised to contact your LEC.